+86-137-9815-7915        luckontech@yeah.net
Home / Products / Heat Shrink / Transformer inlet protective cover High voltage side cover

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Transformer inlet protective cover High voltage side cover

Availability:
Quantity:

Voltage level 1~35KV.
l Cross-linked EPDM rubber.
l Snap-in design, easy to install, disassemble and reuse.
l Prevent short circuit and leakage caused by small animals.
l It is convenient for users to routinely check and repair, without destroying the lap point of the new insulation method.
l Prevent dust, dirt and condensation flashover.
l The product meets RoHS standard.




propertyIndicative valueTest method

PolyolefinsEPDM rubber
tensile strength≥10.0Mpa≥10.0MpaASTM D 2671
Elongation at break≥300%≥1000%ASTM D 2671
Heat aging tensile strength≥6.9Mpa≥9Mpa90ºC/70hrs
Elongation at break for heat aging≥150%≥500%90ºC/70hrs
Thermal shockNo crackingNo crackingJB7829
Oxygen index≥28
GB/T 2406
Dielectric strength≥20KV/mm≥30KV/mmIEC 243
Dielectric constant2-32-3IEC 250
Volume resistance≥1*10¹Ωcm≥4.5*10142.cm lEC 93



Previous: 
Next: 

GET A FREE QUOTE

GET A FREE QUOTE

Please contact us with any questions you may have by filling out and sending the form below.

Home
Copyright © 2023 Guangzhou Luckon Technology Co.,Ltd.All Rights Reserved. Sitemap | Support By Leadong​​​​​​​